---

Possible to be provided with G2 Controller

AX40
4 SPINDLE TERMINAL WRAPPING WINDING MACHINE.
FEATURES

1. Simplified programming by the on-line system and position tracing function.

2. Winding programming language are same as the original commands of our AW series or AX10.

3. Possible to transfer a winding program by using the standard outfit of RS232C between winders or a winder and a personal computer (IBM/PC98).

4. Possible to exercise control over the tension program by our electric tension control command incorporated therein.

5. Both trouble information and all sensor's status can be confirmed at CRT, resulting in making maintenance easy.

6. Easy to use overseas by changing over Japanese and English.

7. Easy to upload and down load a program by using a floppy equipment.

8. A large variety of options are available, resulting in making it a system.

SPECIFICATIONS.

Spindle Speed	16,000rpm. / 8,000rpm. / 4,000rpm
No. of Spindles	4 spindles
Spindle Motor	750w
Spindle Pitch	64mm
Wire Range	0.02mm to 0.60mm
Bobbin O.D.	50mm
Traverse Stroke	X axis --- 90mm (adjustable by each 0.01mm) Y axis --- 90mm (adjustable by each 0.01mm) Z axis --- 80mm (adjustable by each 0.01mm)
Nozzle Indexing	0, 90, 135,---- 3 positions
Control System	On-line programming method
Load/Unloading Tools	Quick release
Wire discharging System	Throw wire discharging
Electric source Single phase	AC200V to 230V(10%), 50/60Hz
Power consumption	1kw
Air Pressure Required	5 to 6 kg/cm2
Dimensions	760(W) X 930(D) X 1,370(H)mm
Weight	250kgs.

OPTIONS

A	External Taper	RTW 40L The taping direction is counter-clockwise RTW 40R The taping direction is clock-wise Tape width max. 32mm Outer diameter of tape roll max. 150mm
	Air Nipper	AN40H for horizontal cutting AN40V for vertical cutting
B	Wire Holder	WH40 holder for wire which has been wound Front/Back stroke : 50mm Up/Down stroke : 15mm
	Load/Unload Unit	For system Front/Back stroke : 240mm
C	Auto Eject Unit	NK40 In-bulk dropper with a chute
	Chuck Opener/Closer	For system

OTHERS

Tail Stock	Synchronizing type to be fixed under the spindle
Skeiner	4 Units of single spindle wire skeiner are used 4 spindles
Safety cover	SC40A/area sensor type, SC40S/Shutter type
Tension Unit	Possible to be mounted with magnet or electric tension unit

Only one option unit can be selected from each group (A,B,C except others) at the same time but more than two options can not be equipped from the same group. One or more options may be combined with any other option from each group A.B.C.